Spendor D7.2 : 2.5-way floorstanding loudspeaker

The Spendor D7.2 is an elegant, modern, medium-size, 2.5 way, floor-standing loudspeaker. The D7.2 delivers music with a fresh vibrant realism that conventional loudspeakers cannot match. It delivers low frequencies with breath‐taking power, scale and authority. It has a beautiful coherence and transparency across the entire sound spectrum. It is easy to place in a multiplicity of rooms, easy to drive, very efficient, plays any kind of music and, if you have the inclination, it will play very loud without compression. With its tall slim enclosure and smart modern finishes D7.2 is entirely at home in any modern living environment. It will do full justice to the finest ancillary equipment. This new level of performance is the direct result of important Spendor innovations.


Category


Share

Spendor D7.2 : 2.5-way floorstanding loudspeaker

The Spendor D7.2 is an elegant, modern, medium-size, 2.5 way, floor-standing loudspeaker. The D7.2 delivers music with a fresh vibrant realism that conventional loudspeakers cannot match. This new level of performance is the direct result of important Spendor innovations.

Spendor LPZ (Linear Pressure Zone) tweeter:
The new Spendor LPZ tweeter is built around a stainless steel front plate that forms a damped acoustic chamber directly in front of a lightweight woven polyamide diaphragm. The front plate incorporates a phase correcting micro foil to equalise sound wave path lengths across the diaphragm surface, simultaneously it generates a symmetrical pressure environment on both faces of the tweeter diaphragm so the tweeter operates in a balanced linear mode. The result is perfect focus, uninhibited sound transmission and a very wide listening window. The front plate also provides excellent mechanical protection for the delicate tweeter dome and a smart modern appearance.

Spendor 18cm drive units developed for D7.2:
The D7.2 mid-bass drive unit has an advanced EP77 polymer cone for superb clarity and vanishingly low colouration. The D7.2 low frequency drive unit has an ultra-rigid two part bonded Kevlar composite cone assembly for accurate powerful low frequency response.

Fifth generation Spendor Linear flow port technology:
Our new fifth generation Spendor Linear flow port incorporates an aerodynamically profiled central baffle (like an aircraft wing) to create a tapered twin-venturi port. Air at the port extremities is decelerated and there is a further reduction in air velocity in the large tapered area at the cabinet base. The result is evenly balanced acoustic pressure and air-flow along the whole length of the port. Spendor`s Linear Flow port technology delivers deep articulate bass with natural timing, even in small rooms or close to a wall.

Spendor dynamic cabinet damping:
In conventional loudspeakers rigid high density cabinet panels are mass-damped to reduce cabinet-talk. Spurious energy is stored and released slowly. This introduces unacceptable blurring and slowing of the sound. Spendor`s solution is asymmetric aperture bracing of the cabinet to disperse internal waves. Dynamic Damping with small low mass constrained polymer dampers at key energy interface points instantly convert any spurious energy in the cabinet into inaudible heat. The result is a silent rigid cabinet and naturally fast engaging sound.

Elegant modern design:
The D7.2 looks as good as it sounds. A new premium finish perfectly complement today`s on-trend interiors: Spendor White, a silky smooth pure white lacquer, for a distinctive contemporary look. Standard finishes are Black Oak, Oak, Walnut, Satin White and Cherry. The plinth is satin black lacquer to complement all finishes.

Specifications

Description: 2.5-way floorstanding
Enclosure type: Rigid, asymmetric braced, vented cabinet with dynamic damping
Vent type: Fifth generation Spendor linear flow, tapered twin-venturi port
Drive units HF: Spendor 22mm LPZ polyamide dome
Drive units LF/MF: Spendor 180mm, with black EP77 polymer cone
Drive units LF: Spendor 180mm, with Kevlar composite cone
Frequency response: 29Hz-25kHz
Sensitivity: 90dB 1 watt 1 metre
Impedance nominal: 8 ohms
Crossover frequencies: 900Hz, 3.2kHz
Amplifier: 25-200 watts
Connections: Single pair recessed precision binding posts
Dimensions H x W x D: 950 x 192 x 333mm (excluding spikes)
Net weight (each): 21kg
Accessories supplied: Height-adjustable spike feet, cloth magnetic grille

Cabinet real wood veneer finishes: Black Oak, Oak, Walnut, Satin White and Cherry

Product reviews
  • sanetkuun@gmail.com
  • sanetkuun@gmail.com
  • sanetkuun@gmail.com
  • sanetkuun@gmail.com
  • sanetkuun@gmail.com
  • sanetkuun@gmail.com
  • sales@avboutique.co.za
Add a review

Where to buy


Please visit our CONTACT page if you have any queries about our products or product retail prices.

Alternatively visit the Retailers section to contact a retailer near you.

Privacy Preference Center

×

Click on contact below to start Whatsapp Chat

× How can we assist?